الصفحة الرئيسية
عن الكلية
عمادة الكلية
كلمة عميد الكلية
نبذة عن العمادة
العمداء السابقون
وكالات الكلية
وكالة الكلية
كلمة وكيل الكلية
نبذة عن وكالة الكلية
وكالة الكلية للدراسات العليا
كلمة وكيل الكلية للدراسات العليا
نبذة عن وكالة الكلية للدراسات العليا
الأنشطة العلمية
وحدة ريادة الأعمال
وحدة الجودة والتطوير
شعبة الإعتماد الأكاديمي
شعبة الجودة
شعبة القياس والتقويم
شعبة التدريب وتطوير الموارد البشرية
وكالة الكلية (شطر الطالبات)
إدارة الكلية
كلمة مدير الإدارة
كلمة مديرة الإدارة
إدارة الكلية شطر الطلاب
إدارة الكلية شطر الطالبات
الخطة الاستراتيجية
الشؤون التعليمية
مواقع التدريب التفاعلي
البحث العلمي
الأبحاث
مجلة كلية العلوم
تواصل معنا
الملفات
عربي
English
عن الجامعة
القبول
الأكاديمية
البحث والإبتكار
الحياة الجامعية
الخدمات الإلكترونية
صفحة البحث
كلية العلوم
تفاصيل الوثيقة
نوع الوثيقة
:
مقال في مجلة دورية
عنوان الوثيقة
:
Effect of selective coating on thermal performance of flat plate solar air heaters
Effect of selective coating on thermal performance of flat plate solar air heaters
الموضوع
:
فيزياء
لغة الوثيقة
:
الانجليزية
المستخلص
:
A transient mathematical model was presented for a single pass flat plate solar air heater. This model was based on an analytical solution of the energy balance equations for various elements of the heater. The flowing air temperature was assumed to vary only in the flow direction. The thermal performance of the heater was investigated by computer simulation using the climatic conditions of Jeddah (lat. 21° 42′ N, long. 39° 11′ E), Saudi Arabia. Effects of solar radiation intensity, mass flow rate of the flowing air (over(m, ̇)f) and the length (L) and width (b) of the absorber plat on the flowing air outlet temperature (Tfo) and the heater instantaneous (ηinst) and daily (ηd) efficiencies were studied. To improve the heater performance, effect of using absorber plates coated with various selective coating materials on the heater performance was also investigated. The best performance was achieved using nickel-tin as a selective coating material with a daily average of the instantaneous efficiency of 0.46. To validate the proposed mathematical model, the simulated results were compared with the measurements that had been performed for the heater with a black painted absorber plate under Tanta, lat. 30° 47′ N (Egypt), weather conditions. It was found that the proposed model is able to predict the Tfo accurately with a daily average relative percentage error of 7.7%. It was also inferred that the annual average of ηd with a nickel-tin selectively coated absorber is higher than that with a black painted absorber by 29.23%.
ردمد
:
03605442
اسم الدورية
:
Energy
المجلد
:
35
العدد
:
4
سنة النشر
:
1431 هـ
2010 م
نوع المقالة
:
مقالة علمية
تاريخ الاضافة على الموقع
:
Saturday, April 10, 2010
الباحثون
اسم الباحث (عربي)
اسم الباحث (انجليزي)
نوع الباحث
المرتبة العلمية
البريد الالكتروني
أحمد عبد العظيم السباعي
El-Sebaii, A A
باحث
دكتوراه
aasebaii@yahoo.com
هند عتيق السناني
Al-Snani, Hend Ateq
باحث
ماجستير
الملفات
اسم الملف
النوع
الوصف
26366.pdf
pdf
Abstract
الرجوع إلى صفحة الأبحاث